October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

(Without F45) K26 Headlamp Control Module Programming

To program a replacement or existing control module, perform the following procedure:

Access the Service Programming System (SPS) and follow the on-screen instructions.
On the SPS Supported Controllers screen, select K26 Headlamp Control Module - Programming and follow the on-screen instructions.
On the SPS Supported Controllers screen, select K26 Headlamp Control Module - Setup while following the on-screen instructions.
Clear DTCs.