LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2024 >> Traverse LT, 4WD >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup >> Repair Instructions >> K124 Image Processing Module: Programming and Setup (with UKL) >> Unsuccessful Programming Recovery
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Unsuccessful Programming Recovery

In the event of an interrupted or unsuccessful setup event, perform the following steps:

  1. Ignition / Vehicle OFF.
  2. Ensure the Image Processing Module, DLC and programming tool connections are secure and the SPS software is up to date.
  3. Ignition / Vehicle OFF, all access doors closed, all vehicle systems OFF for two minutes.
    • Attempt to reprogram the K124 Image Processing Module 
    1. Verify the K124 Image Processing Module can be reprogrammed.
      • If the image processing module cannot be reprogrammed, contact Techline Customer Support Center (TCSC).
      • Go to next step: If the K124 Image Processing Module can be reprogrammed.
    2. All OK.
scientia non olet · About LEMON Manuals