LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2024 >> Traverse LT, FWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Programming And Setup >> Repair Instructions >> K45 Powertrain Control Module: Programming and Setup >> Reprogram Control Module
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Reprogram Control Module

To reprogram an existing K45 PCM, perform the following procedure:

  1. Ignition - On / Vehicle - In Service Mode
  2. Access SPS and follow the on-screen instructions.
  3. Perform one of the following SPS Programming functions:
    • K45 Powertrain Control Module and follow the on-screen instructions.
  4. Clear DTCs after completing the Programming procedure.
  5. Configuration - If applicable
  6. Clear DTCs.
scientia non olet · About LEMON Manuals