LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2024 >> Traverse LT, FWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Programming And Setup >> Repair Instructions >> K73 Telematics Communication Interface Control Module: Programming and Setup (UE1) >> Programming Control Module for an Update
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Programming Control Module for an Update

To program an existing control module for an update, perform the following procedure:

NOTE:

Begin with the vehicle in the vehicle OFF power mode. The Service Programming System will power mode the vehicle.

  1. Ignition / Vehicle OFF.
  2. Access the Service Programming System (SPS) and follow the on-screen instructions.
  3. Check and follow Preliminary Information or Technical Service Bulletins before programming. If control module software updates are available, in the SPS Supported Controllers screen, select K73 - Software Update and follow the on-screen instructions.
    NOTE:

    For programming an existing module, you only need to perform "Software Update".

  4. Clear DTCs.
scientia non olet · About LEMON Manuals