LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2024 >> Traverse RS, 4WD >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup >> Repair Instructions >> K73 Telematics Communication Interface Control Module: Programming and Setup (UE1) >> Unsuccessful Programming Recovery
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Unsuccessful Programming Recovery

In the event of an interrupted or unsuccessful programming event, perform the following steps:

NOTE:

Begin with the vehicle in the vehicle OFF power mode. The Service Programming System will power mode the vehicle.

  1. Ignition / Vehicle OFF
  2. Ensure the control module, DLC and programming tool connections are secure and the SPS software is up to date.
  3. Verify the control module can be reprogrammed.
    • If the control module cannot be reprogrammed 
  4. Ignition OFF for one minute.
    1. Verify the control module can be reprogrammed.
      • If the control module cannot be reprogrammed 
      • Replace the control module.
      • Go to next step: If the control module can be reprogrammed 
    2. Clear DTCs.
    3. All OK.
scientia non olet · About LEMON Manuals