LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2024 >> Trax LS >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup >> Repair Instructions >> K71 Transmission Control Module or Q8 Control Solenoid Valve Assembly: Programming and Setup (6T40 (MNH MNK)) >> Programming an Existing or New Control Module
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Programming an Existing or New Control Module

To program an existing or new control module, perform the following procedure:

  1. Install the special tool: EL-49642 SPS Programming Support Tool
  2. Ignition - On / Vehicle - In Service Mode
  3. Access SPS and follow the on-screen instructions for the control module: K71 Transmission Control Module or Q8 Control Solenoid Valve Assembly
  4. Select: Programming
  5. Select: Setup
scientia non olet · About LEMON Manuals