Circuit/System Verification
- Verify no other driver assistance or driver monitoring DTCs are set.
- If any other DTCs are set
Diagnose all other DTCs first. Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- Go to next step: If no other DTCs are set
- If any other DTCs are set
- Verify DTC U02B3 is not set as a current DTC.
- If DTC U02B3 is set as a current DTC
Replace the K124 Image Processing Module.
- Go to next step: If DTC U02B3 is not set as current DTC or is set as a history DTC
- If DTC U02B3 is set as a current DTC
- All OK.