DRIVEABILITY Code-To-Test Menu
DRIVEABILITY TEST FAULT CODE
| Code | Action Required |
|---|---|
| 88 | Start of test sequence |
| 12 | Battery circuit to logic module has been disconnected |
| 13 | Repair vacuum supply to MAP sensor |
| 15 | Perform DR1 |
| 21 | Repair open circuit between logic module and O2 sensor |
| 31 | Perform DR4 |
| 31 & 34 | Repair open circuit between ignition feed wire and solenoids |
| 32 | Perform DR5 |
| 33 | Perform DR6 |
| 34 | Perform DR3 |
| 35 | Perform DR7 |
| 41 | Repair charging system |
| 42 (Perform ATM Test) | YYY-Perform DR8 NNN-Perform DR9 |
| 44 or 52 or 53 or 54 | Replace logic module |
| 51 | Perform DR2 |
| 51 & 34 | Perform DR3 |
| 55 | End test sequence |
| Blank Display | Perform DR10 |
| No Code 88 | Perform DR11 |
| No Fault Codes | Perform DR12 |