Alignment Procedures

Fig 1: Caster Adjustment (Except McPherson Strut) To adjust caster, lengthen or shorten strut rod as shown.

Fig 2: Toe Adjustment (Except McPherson Strut) To adjust, turn eccentric to desired setting.

Fig 3: Camber Adjustment (Except McPherson Strut) Adjust caster first (turn upper shaft). Then, to adjust camber, change shims.

Fig 4: Caster adjustment (Except McPherson Strut) Disconnect upper control arm and rotate shaft to obtain desired caster adjustment.

Fig 5: Camber adjustment (Except McPherson Strut) Rotate pivot shaft or add shims to adjust camber angle.