Lift Switch Test

Remove control switch from trim panel. Using ohmmeter, check continuity of switch. See MASTER WINDOW SWITCH CONTINUITY and Fig 1 . Replace appropriate switch as necessary if switch continuity is not as specified.

Fig 1: Power Window Control Switch Pin Identification

Courtesy of CHRYSLER CORP.

MASTER WINDOW SWITCH CONTINUITY

Switch Position	Check Continuity Between
OFF	Pins 1 & 2; Pins 2 & 3
Pins 2 & 4; Pins 2 & 6
Driver's UP	Pins 2 & 6; Pins 3 & 5
Right Front UP	Pins 1 & 5; Pins 2 & 4
Driver's DOWN	Pins 2 & 3; Pins 5 & 6
Right Front DOWN	Pins 1 & 2; Pins 4 & 5