LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 1996 >> Sebring LXi >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Cruise Control System - Convertible) >> Self-Diagnostic System >> Retrieving Diagnostic Trouble Codes >> Using Scan Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using Scan Tool

WARNING: This page is about a different variant/trim than selected.
  1. Ensure battery is fully charged. Attempt to start engine. Turn ignition off. Connect scan tool to Data Link Connector (DLC), located below driver's side of instrument panel.
  2. Turn ignition on. Using scan tool manufacturer's instructions, record all DTCs displayed on scan tool. Using all DTCs obtained, proceed to SELF-DIAGNOSTICS TESTS. Once all repairs are made, ensure DTCs are cleared from PCM. See CLEARING DIAGNOSTIC TROUBLE CODES.
scientia non olet · About LEMON Manuals