Crankshaft, Engine

End Play:
New Part 0.09 - 0.24 mm (0.0035 - 0.0094 inch)
Wear Limit 0.37 mm (0.015 inch)

Main Bearing Journal Diameter:
Standard 60.000 ± 0.008 mm (2.3622 ± 0.0003 inch)
1st Undersize 59.975 ± 0.008 mm (2.361 ± 0.0003 inch)
Maximum Out of Round 0.0035 mm (0.0001 inch)
Maximum Taper 0.0038 mm (0.0001 inch)
Diametrical Clearance 0.018 - 0.058 mm (0.0007 - 0.0023 inch)

Connecting Rod Journal Diameter:
Standard 49.992 ± 0.008 mm (1.968 ± 0.0003 inch)
1st Undersize 49.967 ± 0.008 mm (1.967 ± 0.0003 inch)
Maximum Out of Round 0.0035 mm (0.0001 inch)
Maximum Taper 0.0038 mm (0.0001 inch)