LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 1998 >> Cirrus >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Computer (Except Coupe) >> Body Control Computer Tests >> Power Door Lock Test 8A - Identifying RKE Problems >> Remote Keyless Entry (RKE) Does Not Operate
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Remote Keyless Entry (RKE) Does Not Operate

  1. Ensure Body Control Module (BCM) is ACTIVE ON THE BUS. Go to SYMPTOM ID TEST 1A  .
  2. Using scan tool, select READ DTCs and look for NO POWER TO MODULE fault message. If NO POWER TO MODULE message is present, see VEHICLE COMMUNICATIONS  .
  3. Check RKE transmitter battery voltage. If battery voltage is less than 3 volts, replace battery.
  4. Substitute a known good RKE transmitter from another JA body vehicle. Using scan tool, select PROGRAM RKE and reprogram RKE transmitter according to scan tool instructions. If RKE system still does not operate, replace BCM.
NOTE: If vehicle is equipped with Remote Keyless Entry (RKE), there will be a RKE antenna terminal at back of BCM. Antenna connector will have a single White wire terminal above instrument panel 10-pin connector.
scientia non olet · About LEMON Manuals