Replacement

The Remote Keyless Entry (RKE) Module is located between the junction block and body control module. Refer to Instrument Panel, Gauges and Warning Indicators/Instrument Panel and Systems for Junction Block/BCM Removal and Installation procedures.

REMOVAL
1. With the junction block/BCM removed, separate the two. Refer to Instrument Panel, Gauges and Warning Indicators/Instrument Panel for BCM Removal and Installation procedures.

Remote Keyless Entry Module Location:

2. Remove the three retaining screws to RKE Module and separate from BCM.

INSTALLATION
- For installation, reverse the above procedures.

NOTE: The RKE transmitters must be reprogrammed to the new RKE module.