Inactive Trouble Code Condition

WARNING: This page is about a different car, the 1998 Plymouth Breeze, 1998 Dodge Stratus, and 1998 Chrysler Cirrus. However, it is still accessible from the selected car via links, so may be relevant.

This procedure applies if you have been sent here from diagnostic tests and have just attempted to simulate the condition that initially set the Diagnostic Trouble Code (DTC). The following additional checks may assist in identifying a possible intermittent problem:

Visually inspect related wiring harness connectors for broken, bent, pushed out or corroded terminals.
Visually inspect related wiring harnesses for chafed, pierced or partially broken wires.
Check for pertinent Technical Service Bulletins (TSBs) relating to the problem.