LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 1998 >> Sebring Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Cruise Control Systems) >> Self-Diagnostic System >> Retrieving Diagnostic Trouble Codes >> Using Scan Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using Scan Tool

WARNING: This page is about a different car, the 1998 Plymouth Breeze, 1998 Dodge Stratus, and 1998 Chrysler Cirrus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure battery is fully charged. Turn ignition off. Connect scan tool to Data Link Connector (DLC). See DATA LINK CONNECTOR (DLC) table for connector location and number of connections required. Some models require more than one connection to retrieve diagnostic information. See Fig 1 .
    DATA LINK CONNECTOR (DLC)

    Application DLC Location
    Breeze, Cirrus & Stratus (1) Above Driver's Kick Panel
    (1) Requires one connection at 16-pin DLC.
    Fig 1: Locating Engine Data Link Connector (DLC)
    G95F12679Courtesy of CHRYSLER CORP.
  2. Turn ignition on. Using scan tool manufacturer's instructions, record all DTCs displayed on scan tool. Using all DTCs obtained, proceed to SELF-DIAGNOSTICS TESTS  . Once all repairs are made, ensure DTCs are cleared from PCM. See CLEARING DIAGNOSTIC TROUBLE CODES  .
scientia non olet · About LEMON Manuals