Left Mount: Removal
WARNING: This page is about a different car, the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, and 2003 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Raise vehicle on hoist.
- Remove the isolator attaching nuts from top of the mounting bracket (Fig 1).
- Support the engine with a jack and a block of wood across the full width of the oil pan.
- Remove the lower attaching nuts from the bottom of the isolator to the frame (Fig 1).
- Raise engine carefully with jack enough to remove the isolator with heat shield from its mount.