LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Battery System & Charging System) >> Generator >> Installation >> Installation - 2.7L
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation - 2.7L

WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install generator.
  2. Install pivot bolt, leave loose.
  3. Connect the generator field circuit plug.
  4. Install the B+ terminal nut and wire and tighten to 9.8 N.m (85 +/- 15 in. lbs.).
  5. Install the generator drive belt. Refer to the GENERATOR/POWER STEERING BELT INSTALLATION .
  6. Adjusting T-bolt and tighten belt.
  7. Remove jackstand from under radiator and install lower radiator crossmember support.
  8. Reposition transmission cooler and tighten fasteners.
  9. Install lower plastic splash shield.
  10. Lower vehicle.
  11. Connect negative battery cable.

    Tighten all fasteners to the proper torque. Refer to SPECIFICATIONS - TORQUE .

scientia non olet · About LEMON Manuals