Wipers Run At Low Speed With Switch In High Speed Position
WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Check for faulty HI-LO wiper relay.
- Using an ohmmeter, check for open circuit between terminal C of the HI-LO wiper relay and terminal 12 of the BCM 33 bone 12-way connector. If OK, go to Step 3. If not OK, repair as necessary.
- Check wiper switch.
- Check for binding linkage
- Refer to MOTOR RUNS SLOWLY AT ALL SPEEDS .