Rear Mount: Installation

WARNING: This page is about a different car, the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, and 2003 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.

Position isolator onto crossmember.
Install bolts attaching isolator to crossmember and tighten to 33 N.m (250 in. lbs.) (Figure).
Lower transaxle onto isolator.
Install isolator nuts and tighten to 61 N.m (45 ft. lbs.) (Figure).
Lower vehicle.