Removal & Installation
- The TCM is located on passenger's side front corner of engine compartment, on inner fender, near windshield washer reservoir. See Fig 1.
- Disconnect negative battery cable. Loosen retaining bolt at center of 60-pin electrical connector on TCM. Disconnect electrical connector from TCM. Remove screws and TCM. To install, reverse removal procedure.
- When replacing TCM, pinion factor and shift quality quick learn procedure should be performed. See PINION FACTOR PROCEDURE and TRANSAXLE SHIFT QUALITY QUICK LEARN PROCEDURE in COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION.
Courtesy of CHRYSLER CORP.