LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2001 >> Neon R/T >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Remote Keyless Entry Systems >> Programming >> Remote Keyless Entry Module
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Remote Keyless Entry Module

NOTE: A scan tool is required for programming Remote Keyless Entry (RKE) module.
  1. Ensure ignition is off. Connect scan tool to Data Link Connector (DLC). DLC is located on bottom of instrument panel, to left of brake pedal. See Figure. Turn ignition switch to RUN position.
  2. Using scan tool, select THEFT ALARM, VTSS, MISCELLANEOUS and then CONFIGURE MODULE. Follow scan tool prompts. When configuration (programming) is complete, turn ignition off and disconnect scan tool. Program RKE transmitters into RKE module memory. See REMOTE KEYLESS ENTRY TRANSMITTER .
scientia non olet · About LEMON Manuals