LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2001 >> Prowler >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control System >> Knock Sensor >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Knock Sensor: Installation

  1. Install knock sensor. Tighten bolt to 10 N.m (7 ft. lbs.) torque. Over or under tightening affects knock sensor performance, possibly causing improper spark control.
  2. Attach electrical connector to knock sensor.
  3. Install intake manifold plenum and intake manifold. (see INTAKE MANIFOLD under REMOVAL & INSTALLATION in 3.5L V6 ENGINE article.
scientia non olet · About LEMON Manuals