LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules - Except Coupe >> System Tests >> Instrument Cluster Systems >> Malfunction Indicator Light Not Operating Properly
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Malfunction Indicator Light Not Operating Properly

NOTE: After making any repairs, perform BODY VERIFICATION TEST  under VERIFICATION TESTS.
  1. Perform self-test on instrument cluster. Press and hold TRIP/RESET button and turn ignition on. If Malfunction Indicator Lamp (MIL) does not turn on for 4 seconds then turn off, go to step  3 . If MIL turns on for 4 seconds then turns off, go to next step.
  2. Connect scan tool to Data Link Connector (DLC) located under left side of instrument panel. See Figure . Turn ignition on. Using scan tool, check for DTC. If any DTCs are present, diagnose DTCs. See DIAGNOSTIC TROUBLE CODE IDENTIFICATION  table under SELF-DIAGNOSTIC SYSTEM. If no DTCs are present, go to next step.
  3. Turn ignition off. Remove instrument cluster and inspect MIL bulb and socket. See INSTRUMENT CLUSTER  under REMOVAL & INSTALLATION. Replace MIL bulb and socket as necessary. If MIL bulb and socket are okay, replace instrument cluster.
scientia non olet · About LEMON Manuals