LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2001 >> Sebring Limited >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules - Except Coupe >> System Tests >> Instrument Cluster Systems >> Charging System Warning Indicator Not Operating Properly
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Charging System Warning Indicator Not Operating Properly

NOTE: After making any repairs, perform BODY VERIFICATION TEST  under VERIFICATION TESTS.
  1. Perform self-test on instrument cluster. Press and hold TRIP/RESET button and turn ignition on. If charging system indicator does not turn on for 4 seconds then turn off, go to step  3 . If charging system indicator turns on for 4 seconds then turn off, go to next step.
  2. Connect scan tool to Data Link Connector (DLC) located under left side of instrument panel. See Figure . Turn ignition on. Using scan tool, check for DTCs. If any DTCs are present, diagnose and repair DTCs before continuing. See DIAGNOSTIC TROUBLE CODE IDENTIFICATION  table under SELF-DIAGNOSTIC SYSTEM. If no DTCs are present, go to next step.
  3. Remove and disconnect instrument cluster. See INSTRUMENT CLUSTER  under REMOVAL & INSTALLATION. Remove and inspect charging system warning indicator bulb and socket. Replace bulb or socket as necessary. If bulb and socket are okay, diagnose PCI communication circuit. See BUS +/- SIGNALS OPEN OR NO RESPONSE FROM INSTRUMENT CLUSTER  under COMMUNICATIONS. If bus circuit is okay, replace instrument cluster.
scientia non olet · About LEMON Manuals