LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2002 >> 300M Special >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery System & Charging System >> Generator >> Installation >> Installation - 3.5L
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation - 3.5L

  1. Install generator.
  2. Install the pivot bolt.
  3. Install the lower mounting bolt.
  4. Connect the B+ wire and tighten nut and tighten to 9.8 N.m (85 +/- 15 in. lbs.).
  5. Connect the generator field circuit connector.
  6. Install generator drive belt. Refer to GENERATOR/POWER STEERING BELT .
  7. Tighten the pivot bolt.
  8. Tighten the lower mounting bolt.
  9. Install the upper radiator support and tighten bolts.
  10. Connect the negative battery cable. Tighten all fasteners to the proper torque. Refer to the Torque Specifications chart in this section.
scientia non olet · About LEMON Manuals