LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2002 >> Intrepid (CANADA) V6-2.7L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Restraints and Safety Systems >> Air Bag Control Module >> Service and Repair >> Side Impact Airbag Control Module
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Side Impact Airbag Control Module

REMOVAL
1. Disconnect and isolate the battery negative cable remote terminal.
2. Remove the lower B-pillar trim from the appropriate side of the vehicle. Refer to Body, Interior, B-Pillar Lower Trim, REMOVAL.

Fig. 25 SIACM Position/Orientation:




3. Disconnect the side impact airbag control module electrical connector.
4. Remove the SIACM retaining screws and remove the module from the vehicle.

INSTALLATION
1. Position the SIACM in B-pillar and install the retaining screws. Torque the screws to 12 Nm (105 in. lbs.).
2. Connect the SIACM electrical connector.
3. Install the lower B-pillar trim. Refer to Body Interior, B-Pillar Lower Trim, INSTALLATION.

WARNING: DO NOT CONNECT THE BATTERY NEGATIVE CABLE REMOTE TERMINAL. REFER TO ELECTRICAL, RESTRAINTS, DIAGNOSIS AND TESTING - AIRBAG SYSTEM FIRST.
scientia non olet · About LEMON Manuals