October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Mode Door Actuator: Installation
- Connect the wire harness connector to the mode door actuator. Install the mode door actuator on the HVAC housing, making sure its keyed shaft is positioned properly. Install the 3 fastener screws and tighten.
- Reposition the center support bracket and install fastener. Install the rear seat heat forward adaptor duct. Install the center floor heat adaptor duct.
- Install the floor console. Install the left and right underpanel ducts. Connect the negative battery cable remote terminal to the remote battery post.