LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2002 >> Intrepid Base >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul & Installation >> Emission Systems & Sub-Systems >> EGR Valve Assembly >> Installation (2.7L)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation (2.7L)

  1. To install, reverse removal procedure. Use NEW gasket at EGR valve assembly and NEW rubber seals on each side of EGR upper pipe. Ensure EGR upper pipe correctly seats in upper intake manifold.
  2. Ensure all bolts are loosely installed before tightening any bolts. Tighten EGR upper pipe-to-upper intake manifold bolts, EGR upper pipe-to-EGR valve assembly bolts, EGR lower pipe-to-exhaust manifold bolts and then EGR valve assembly bolts to specification. See TORQUE SPECIFICATIONS . To install remaining components, reverse removal procedure.
scientia non olet · About LEMON Manuals