Rear Mount: Installation
WARNING: This page is about a different car, the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, and 2003 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
- Position isolator onto crossmember.
- Install bolts attaching isolator to crossmember and tighten to 33 N.m (250 in. lbs.) (Figure).
- Lower transaxle onto isolator.
- Install isolator nuts and tighten to 61 N.m (45 ft. lbs.) (Figure).
- Lower vehicle.