LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2002 >> Voyager EC >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul & Installation >> Computerized Engine Controls >> Front Control Module >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Control Module: Installation

    NOTE: The FCM must be programmed to the correct radio EQ curve using the DRBIII®. This will ensure that the audio system is operating correctly.
  1. Install FCM into the IPM. Install and tighten FCM mounting screws to specification. See TORQUE SPECIFICATIONS . Rotate the IPM assembly downward to secure in mounting bracket.
  2. Using the DRBIII®, select Front Control Module, then MISC. Follow instructions on the DRBIII® and program the EQ curve of the radio into the FCM. Install battery and reconnect battery cables.
Fig 1: Locating Intelligent Power Module & PCM
G00030187Courtesy of DAIMLERCHRYSLER CORPORATION
Fig 2: Locating Front Control Module
G00114659Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals