Remote Keyless Entry Systems: Programming: Transmitter

NOTE: For more information, see TSB REMOTE KEYLESS ENTRY (RKE) PROGRAMMING PROCEDURES .

NOTE: This feature allows you to program transmitters in case one is lost or an extra transmitter(s) is desired. Up to 4 transmitters can be programmed to your vehicle.

NOTE: If you do not have a programmed transmitter, contact your dealer for details.

Turn the ignition switch to the ON position and leave the vehicle in Park.
Using a previously programmed transmitter, press the UNLOCK button for 5-10 seconds. While the UNLOCK button is being pressed (after 5 seconds), press the PANIC button and release both buttons simultaneously. You will hear a chime sound to signal you that programming on the transmitter(s) may occur.
You may program up to 4 transmitters for your vehicle within a 30 second time limit. Press and release both LOCK and UNLOCK buttons of a transmitter at the same time; then press and release any of the buttons once, you will hear a beep when the transmitter has been successfully programmed. A chime will sound when the 30 seconds is over, or if you turn the ignition switch OFF.
You must repeat step 3 for all transmitters that will be used with this vehicle (up to 4 total).