September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Power Vent Window Motor: Installation
- Obtain new vent window motor.
- Snap the actuator link socket onto the quarter window ball socket. Using a soft rubber mallet, push the circular link tab flush with link surface.
- Install bolts holding power vent motor to "D" pillar.
- Reconnect wire connector to power vent motor.
- Reconnect the battery negative cable.
- Cycle quarter window open/close to verify function.
- Install "D" pillar trim panel. See "D" PILLAR TRIM PANEL
.