Section 126 (Cruise Control Systems): Cable: Installation
WARNING: This page is about a different car, the 2003 Dodge Grand Caravan, 2003 Dodge Caravan, 2003 Chrysler Voyager, and 2003 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
- Slide cable into throttle cable bracket and engage retaining tabs.
- Rotate the throttle cam forward to the wide open position and install speed control cable clasp.
- Rotate the throttle cam forward to the wide open position and install throttle cable clasp.
- Install retaining clip that attaches cable to servo.
- Insert servo studs through holes in the mounting bracket and speed control cable.
- Install nuts, tighten to 6.7 N-m (60 in. lbs.).
- Connect vacuum hose to servo.
- Connect electrical connector.
- Install servo and bracket and tighten nuts and bolt.
- Connect negative battery cable.