LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2003 >> Intrepid SXT >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning Controls >> A/C Pressure Transducer >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

A/C Pressure Transducer: Removal

  1. Open hood and disconnect the negative battery cable remote terminal from the remote battery post Fig 1 .
  2. Disconnect the wire harness connector from the a/c pressure transducer.
    CAUTION: A slight release of pressure trapped in the fitting may be experienced. It is not necessary to discharge the refrigerant system.
  3. Remove the transducer with a counterclockwise rotation using a 14 mm open-end wrench.
    Fig 1: Removal/Installation Of Negative Battery Cable Remote Terminal
    G02725721Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals