LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2003 >> Intrepid SXT >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning Controls >> Mode Door Actuator >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Mode Door Actuator: Installation

  1. Connect the wire harness connector to the mode door actuator.
  2. Install the mode door actuator on the HVAC housing, making sure its keyed shaft is positioned properly.
  3. Install the three fastener screws and tighten to 2.2 N.m (20 in. lbs.).
  4. Reposition the center support bracket and install fastener.
  5. Install the rear seat heat forward adaptor duct.
  6. Install the center floor heat adaptor duct.
  7. Install the floor console (Refer to INTERIOR ).
  8. Install the left and right underpanel ducts.
  9. Connect the negative battery cable remote terminal to the remote battery post.
scientia non olet · About LEMON Manuals