Test Routine

The Self Test will perform the following procedure (at 2 second intervals with a short pause between VF messages):

1. Chime once.
2. Count all digits from 0 to 9 (with decimal on) in approximately 3 seconds.
3. Display the last 6 digits of the Vehicle Identification Number (VIN).
4. Display Application Code Level (for example FL0002).
5. Display EEPROM version (for example EE 02).
6. Display Boot Loader version (for example bL 01).
7. Display Speedometer Calibration Points.
8. Display the Fuel Gauge Calibration Points.
9. Display the Temperature Calibration Points: min, normal, mid, temp high, and temp critical.
10. Display the Tachometer Calibration Points.
11. Illuminate all learned and standard indictors (Telltale and VF indicators) for approximately 5 seconds.

For complete Description, Operation and service of the EMIC, refer to INSTRUMENT CLUSTER .