Powertrain Control Module Connectors
The Powertrain Control Module (PCM) is an engine and transmission controller module all in one, if the vehicle is equipped with an automatic transmission. The PCM uses four wiring harness connectors to receive and send engine and transmission data. To ease assembly, the mating wiring harness connector is color-coded. Each module connector cavity has its own unique color identification stripe located on the outside of each connector cavity.
NOTE:
Connector Cavities A, B, C, and D must be connected prior to battery connection and ignition key on to avoid setting erroneous controller fault codes. It is also recommended that cavity A connector is made prior to any other connectors.
The PCM module utilizes four wiring harness connectors as described:
- Connector Cavity "A" Is For Power & Ground (Black)
- Connector Cavity "B" Is For Engine Side (Orange)
- Connector Cavity "C" Is For Headlamp & Dash (White)
- Connector Cavity "D" Is For Transmission (Green) If Equipped