LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2003 >> PT Cruiser L4-2.4L VIN B >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Body and Frame >> Keyless Entry Module >> Testing and Inspection >> Programming and Relearning
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Programming and Relearning

STANDARD PROCEDURE - RKE/VTSS CONFIGURING A NEW MODULE

To switch operating modes or to configure a new module, a DRB III(R) scan tool must be used.

Fig.4 Data Link Connector (DLC) Location:




1. Hook up the DRB III(R) scan tool to the Data Link Connector (DLC).
2. With the key in the ignition, turn the key to the RUN position.
3. After the DRB III(R) scan tool initialization, perform the following:
a. Select "Theft Alarm.
b. Select "VTSS."
c. Select "Miscellaneous."

4. Once in the "Miscellaneous" screen:
a. If you wish to configure a new module, select "Configure Module.
scientia non olet · About LEMON Manuals