LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2003 >> Sebring LXi, 2D Convertible >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Wheel Hubs >> Front Axle >> Drive Shaft Assembly >> Disassembly And Assembly >> Assembly Service Points >> >> A << Dynamic Damper/Damper Band/TJ Boot Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>> A << Dynamic Damper/Damper Band/TJ Boot Installation

  1. Install the dynamic damper in the position shown in the illustration.
    ASSEMBLY SERVICE POINTS

    ITEM LH RH
    A mm (in) 242 +/- 3 (9.5 +/- 0.12) 254 +/- 3 (10.0 +/- 0.12)
    CAUTION:
    • There should be no grease adhered to the rubber part of the dynamic damper.
    • The damper band and the TJ boot band (small) are different in shape. Be careful not to assemble a wrong band by identifying a color of the band.
      Fig 1: Installing Dynamic Damper
      G02693823Courtesy of DAIMLERCHRYSLER CORP.
  2. Secure the damper bands.
    DAMPER BANDS

    ITEM BAND COLOR
    Damper band Blue
    TJ boot band Silver
  3. Wrap plastic tape around the shaft spline, and then install the TJ boot band (small) and TJ boot.
scientia non olet · About LEMON Manuals