LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2003 >> Sebring LXi, 2D Convertible >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul & Installation - Except Coupe >> Programming >> Sentry Key Immobilizer Module >> Programming SKIM
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming SKIM

  1. Connect scan tool to Data Link Connector (DLC), located under left side of instrument panel. See Figure. Using scan tool, select THEFT ALARM, SKIM then MISC. Select PCM REPLACED. Obtain 4-digit Personal Identification Number (PIN) from vehicle owner or manufacturer.
    CAUTION: Enter correct country code in SKIM. If incorrect country code is entered, SKIM must be replaced.
  2. Enter secured access mode by entering PIN code for vehicle. Select COUNTRY CODE. Enter correct country. Select YES to update VIN. SKIM will learn VIN from Powertrain Control Module (PCM). Press ENTER to transfer secret key data from PCM to SKIM. Program ignition keys to SKIM.
scientia non olet · About LEMON Manuals