Start & Stall Condition: Notes
NOTE:
For circuit identification and wiring diagram, see WIRING DIAGRAMS
. If Powertrain Control Module (PCM) is replaced, PCM must be reprogrammed. See PROGRAMMING. After each repair procedure has been completed, reconnect all components. Perform POWERTRAIN VERIFICATION TEST VER-1 to ensure system is functioning properly. See the following:
- On 2.4L, see POWERTRAIN VERIFICATION TEST VER-1 under VERIFICATION TESTS in SELF-DIAGNOSTICS - CARAVAN & VOYAGER - 2.4L article.
- On 3.3L and 3.8L, see POWERTRAIN VERIFICATION TEST VER-1 under VERIFICATION TESTS in SELF-DIAGNOSTICS - CARAVAN, TOWN & COUNTRY, & VOYAGER - 3.3L & 3.8L article.