October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Body Control Module: Removal
- Remove the Junction Block/BCM from the vehicle. Refer to JUNCTION BLOCK
.
- Remove the four BCM attaching screws from the Junction Block.
- Disconnect BCM from the Junction Block.
NOTE:
The Remote Keyless Entry (RKE) module is attached to the BCM with three screws. This must be transferred (if equipped) to the new BCM.
NOTE:
If the BCM is replaced, the Vehicle Theft /Security System (VTSS (if equipped) must be enabled in the new BCM via the DRB III(R) scan tool in order to start the vehicle.