2. Intermittent Wiring And Connectors
The conditions necessary to set this DTC are not present at this time.
NOTE:
Check connectors - Clean/repair as necessary. Poor pin to terminal connections can set DTCs. Using the wiring diagram/schematic as a guide, inspect the wiring and connectors specific to this DTC. Wiggle the wires while checking for shorts and open circuits.
NOTE:
Check for any Technical Service Bulletins that may apply.
Were there any problems found?
- Yes >> Repair as necessary.
- No >> The condition that caused this DTC to set is currently not present. Inspect the related wiring harness for a possible intermittent condition.