LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2004 >> Crossfire Standard >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Ignition System >> Camshaft Position Sensor >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Camshaft Position Sensor: Installation

NOTE: Lubricate the camshaft position sensor O-ring with engine oil.
  1. Position the camshaft position sensor on the cylinder head.
  2. Install the retaining bolt (2) and tighten to 8 N.m (71 in. lbs.).
  3. Connect the camshaft position sensor harness connector.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals