LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2004 >> Intrepid SE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (3.5L Engine (Service Information)) >> Oil Pan >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Oil Pan: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect negative cable from remote jumper terminal.
  2. Remove dipstick and tube.
  3. Raise vehicle on hoist and drain engine oil.
  4. Remove structural collar from rear of oil pan and transmission housing (Fig 1 ).
    Fig 1: Structural Collar
    G03511989Courtesy of DAIMLERCHRYSLER CORP.
  5. Disconnect engine oil cooler line from pan.
  6. Disconnect transmission oil cooler line clips.
  7. Remove oil pan (Fig 2 ).
    Fig 2: Oil Pan
    G03511990Courtesy of DAIMLERCHRYSLER CORP.
  8. Remove oil pan gasket.
  9. Clean oil pan and all gasket surfaces.