LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2004 >> PT Cruiser Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Accelerator Pedal >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Accelerator Pedal: Installation

  1. Position accelerator pedal assembly on dash panel. Install retaining nuts. Tighten retaining nuts to 12 N.m (105 in. lbs.) torque.
  2. Place cable through slot in top of pedal shaft.
  3. While holding pedal lever, Push retainer clip forward in vehicle engaging it into the pedal lever.
  4. Hold the throttle body lever in the wide open position and install the throttle cable.
scientia non olet · About LEMON Manuals