LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2004 >> PT Cruiser Limited, 2.4 8 >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control >> Knock Sensor >> Installation >> Installation - 1.6L
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation - 1.6L

  1. Install the knock sensor. See Figure. Tighten knock sensor bolt to 22 N.m (195 in. Ibs.) torque. Over or under tightening effects knock sensor performance resulting in possible improper spark control. 
  2. Connect the electrical connector for the sensor. See Figure.
  3. Connect the negative battery cable.
  4. Install air cleaner assembly cover.
scientia non olet · About LEMON Manuals