October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Power Liftgate System: Chime/Thermistor: Installation
- Snap the chime/thermistor assembly into the light bar.
- Locate the wires going to the chime/thermistor. Install the wires in the connector. Secure with a tie strap. Refer to SYSTEM WIRING DIAGRAMS
.
NOTE:
Be certain the wires are reinstalled in the correct wire cavities. Failure to do so could result in damage to the thermistor/chime assembly. Refer to CONNECTOR PIN-OUTS
if uncertain.
- Install the rear light bar assembly on the vehicle. Refer to LIFTGATE
.
- Connect the negative battery cable.