October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Full Open Switch: Removal
- Open the liftgate.
- Disconnect and isolate the negative battery cable.
- Remove the left rear D-pillar trim panel from the vehicle. Refer to D-PILLAR TRIM
.
CAUTION:
Locate the two wires coming from the full open switch. On a piece of paper, note the wire color and cavity the wires are currently installed in on both the switch and connector side of the harness. This will prove helpful later.
- Cut the two wires leading to the full open switch and back the wires out of the drive unit's
main electrical connector. Refer to SYSTEM WIRING DIAGRAMS
.
- Using needle nose pliers, depress the full open switch's plastic retaining tabs and remove the full open switch from the drive unit assembly.